Titanium Washer Drilled M10 (20mm o/d)

Titanium Washer Drilled M10 (20mm o/d)
ส่วนจำนวน: MTIWAD10


Titanium Drilled Washer. For even greater weight saving! But really we think they should be used just because they look so trick! Please note that our coloured Titanium is not identical to our Aluminium range. Supplied here individually.


Part No. MTIWAD10
วัสดุ Titanium Grade 5
ประเภทสินค้า Washer
Weight in Gms 1.3200
Bar Code 5053573516619
Product Stickers ไม่่
Country of Manufacture United Kingdom
Thread Diameter 10mm
Outside Diameter 20mm
Thickness 1.7mm
Width ไม่ใช่
Pack Quantity 1



Made from aircraft grade titanium 6AL-4V (grade 5), the outstanding benefits are that we roll the threads to produce greater fatigue strength and reduce galling. These bolts are in excess of 120,000psi ultimate tensile strength, suitable to replace both Grade 5 and Grade 8 steel bolts. We offer Race Spec drilled Flanged Hex Head Bolts, Flanged Hex Head, Tapered Socket Cap, Countersunk Bolts, Dome Head Bolts, Nuts and Washers – from 3mm to 12mm.

  • Density4420kg/m3 (276lb/ft3)
  • Young's Modulus 110GPa (16 x 106 psi)
  • Yield Strength 828MPa (120 x 103 psi)
  • Ultimate Tensile Strength 1030MPa (149 x 103 psi)
  • Compressive Strength 960MPa (139 x 103 psi)
  • Shear Modulus43GPa (6.24 x 106 psi)
  • Ductility 10% elongation at break
  • Poisson's Ratio0.34
  • Hardness 36 Rockwell C
  • Strength-to-Weight Ratio 187 kNm/kg
  • Stiffness-to-Weight Ratio 24.9 Mnm/kg

Black Titanium: Long lasting finish resulting from an application of Diamond Like Coating (DLC). This unique finish increases the fastener lifetime and helps to prevent galling whilst providing a supreme hardness and offering the optimum in corrosion resistance thanks to a nanocomposite coating.



Titanium Washer Drilled M10 (20mm o/d)

Only registered users can write reviews. Please, log in or register